In this experiment we were given a general overview of programming on a dsp kit in assembly level language. This experiment was performed in the class and was demonstrated by a senior. The dsp kit used was TMS320f28375. Arithmetic, logical and shifting operations were studied here. The instructions for above operations were implemented and register values before and after execution were observed and noted down.
DSP kits are used for real time signal analysis(i.e output is obtained as soon as input is provided). In the demonstration, emulation using dsp was carried out. One way to program a DSP is using Code composer studio. It is a software by TI. A code developed by the senior was pre-loaded into the board and. Input was given using a mic and output was given to the speakers.
DSP kits are used for real time signal analysis(i.e output is obtained as soon as input is provided). In the demonstration, emulation using dsp was carried out. One way to program a DSP is using Code composer studio. It is a software by TI. A code developed by the senior was pre-loaded into the board and. Input was given using a mic and output was given to the speakers.
This comment has been removed by the author.
ReplyDeleteCan you mention whuch instructions where used in shift operation?
ReplyDeleteJTAG cable was used to interface the DSP processor because it gives us register values at intermediate stages.
ReplyDeleteJTAG cable was used to interface the DSP processor because it gives us register values at intermediate stages.
ReplyDelete